Helpful Hints...
• Enable:
Specifies whether the entry will be enabled or disabled.
• Interface:
Specifies the
interface -- WAN or WAN Physical -- that the IP packet must use to
transit out of the router, when this route is used.
• Destination:
The IP address of packets that will take this route.
• Subnet Mask:
One bit in the mask specifies which bits of the IP address must match.
• Gateway:
Specifies the next
hop to be taken if this route is used. A gateway of 0.0.0.0 implies
there is no next hop, and the IP address matched is directly connected
to the router on the interface specified: WAN or WAN Physical.