Product Page : DIR-600 Firmware Version : 2.10 Hardware Version : Bx

Network Settings

Use this section to configure the internal network settings of your router and also to configure the built-in DHCP server to assign IP addresses to computers on your network. The IP address that is configured here is the IP address that you use to access the Web-based management interface. If you change the IP address in this section, you may need to adjust your PC's network settings to access the network again.

Please note that this section is optional and you do not need to change any of the settings here to get your network up and running.

Router Settings

Use this section to configure the internal network settings of your router. The IP address that is configured here is the IP address that you use to access the Web-based management interface. If you change the IP address here, you may need to adjust your PC's network settings to access the network again.

Router IP Address :

Default Subnet Mask :

Host Name :

Local Domain Name : (optional)

Enable DNS Relay :

DHCP Server Settings

Use this section to configure the built-in DHCP server to assign IP address to the computers on your network.

Enable DHCP Server :

DHCP IP Address Range : to (addresses within the LAN subnet)

DHCP Lease Time : (minutes)

DHCP Reservations List

Host Name	IP Address	MAC Address	Expired Time

Number of Dynamic DHCP Clients

Host Name	IP Address	MAC Address	Expired Time
xxx	192.168.0.100	00:xx:xx:xx:xx:xx	0 Days 0 Hours 0 Minutes

24 - DHCP Reservation

Remaining number of rules that can be created: 24

	Computer Name	IP Address	MAC Address

Helpful Hints...

• If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck Enable DHCP Server to disable this feature.

• If you have devices on your network that should always have fixed IP addresses, add a DHCP Reservation for each such device.